Clean the mixer with a hot damp cloth, thoroughly wipe the bowl arms and all exterior surfaces.

The drip cup should be removed and cleaned periodically (at least once per week depending on use) and wiped clean. Do not operate the mixer without the drip cup.

USING THE ATTACHMENT FACILITY.

SAFETY INSTRUCTIONS

The following instructions must be observed when using the mixer with attachments.

THE ATTACHMENT AND/OR MIXER SHOULD ONLY BE USED BY A FULLY TRAINED AND COMPETENT PERSON.

Do not fit an attachment while the mixer is operating.

Do not wear loose clothing.

Do not use the mixer or attachment if a fault develops or the machine is unsafe.

Do not access rotating parts.

Do not use excessive force when operating the attachment which could affect the stability of the mixer.

Do not operate the mixer if parts are disassembled.

Always use the attachment and/or mixer in a well lit area.

Always ensure the attachment is operating at the correct speed.

Always ensure the bowl, bowl clamps, attachment and guard are correctly fitted to the machine.

Always use the toggle switch ‘O’ to stop mixer.

Always disconnect the mains electricity supply before cleaning.

Always clean the attachments after use and refer to the attachment manufacturer’s cleaning instructions.

Always service your mixer and attachments regularly; at least twice a year depending on the frequency of use.

Only use attachments approved by Hobart.

FITTING AN ATTACHMENT.

To install an attachment, ensure the electricity supply is isolated. Loosen the thumb screw situated on the attachment hub (see Figure 1). Swivel the hub guard to one side and insert the attachment into the hub. Ensure the square shank of the attachment locates in the square drive of the mixer. Secure the attachment by tightening the thumb screw.

The selected mixer speeds will be determined by the type of attachment fitted.

– 15 –

Page 15
Image 15
Hobart N50 MIXER manual Using the Attachment Facility, Safety Instructions, Fitting AN Attachment

N50 MIXER specifications

The Hobart N50 mixer is a prominent choice for commercial kitchens that demand efficiency and reliability in their food preparation processes. Known for its durability and performance, the N50 mixer is a staple in bakeries, restaurants, and catering operations, designed to handle various mixing tasks with ease.

One of the primary features of the Hobart N50 mixer is its powerful motor, rated at 1/2 horsepower, which ensures consistent and thorough mixing of ingredients. This robust motor allows the mixer to handle dense doughs and large batches without compromising performance. The N50 is equipped with a gear-driven transmission that provides a range of mixing speeds, allowing operators to select the perfect speed for their specific tasks, from slow and gentle mixing to faster, more vigorous blending.

The N50's 5-quart stainless steel bowl is designed for maximum capacity and efficiency. This spacious bowl is ideal for a variety of recipes, from small quantities of frosting to larger batches of dough. The stainless steel construction not only provides durability but also makes it easy to clean, a significant consideration in any busy kitchen environment.

Another notable aspect of the Hobart N50 mixer is its user-friendly design. The mixer features a simple, ergonomic control panel that allows for easy operation. The bowl can be raised and lowered with a single lever, providing convenient access for adding ingredients or removing the finished product. Additionally, the mixer includes a clear and intuitive speed control knob, facilitating quick adjustments while mixing.

The N50 is equipped with various attachments that expand its versatility. The standard equipment includes a flat beater, wire whip, and dough hook, enabling the mixer to tackle a wide range of culinary tasks. Optional accessories are available, allowing operators to customize their mixer to suit their specific needs, whether they're whipping cream, kneading dough, or preparing batter.

Hobart is recognized for integrating advanced technologies into their equipment, and the N50 mixer is no exception. The mixer is designed with safety features, such as a safety overload switch that prevents damage from unnecessary strain, ensuring longevity and reliability.

In conclusion, the Hobart N50 mixer stands out with its powerful motor, durable construction, user-friendly features, and versatility for various culinary tasks. It’s an essential tool that combines superior performance with thoughtful technology, making it a trusted choice for foodservice professionals worldwide.