Honeywell MS4103 manual S10 Series MS4110 MS7510 MS8110

Spring Return Direct Coupled Actuator

S10 Series (MS4110; MS7510; MS8110)

MS4110, MS7510, MS8110 S10 Series Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air- conditioning (HVAC) systems. They can drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation.

SPECIFICATIONS
Actuator Type	Damper, Valve
Rotational Stroke	95 ±3 degrees
Fail Safe Mode	Spring Return
Rated Torque	88 lb-in. (10 Nm)
External Auxiliary Switches Available ..	Yes, SW2-US
Electrical Connections	Enclosed screw terminal strip
	(22 to 14 AWG)
Environmental Rating	NEMA2
Frequency	60 Hz
Manual operation	Manual crank
Mounting	Direct Coupled
Maximum Noise Rating,
Holding (dBA @ 1m)	20 (no audible noise)
Maximum Noise Rating,
Driving (dBA @ 1m)	40
Timing, Nominal Driving at 60 Hz	45 sec. or 90 sec.
Power Consumption, Driving	14 VA, 30 VA, or 45 VA
Rotational Stroke Adjustment	Mechanically limited 5 degree
	increments
Compatible Damper Shafts	3/8 to 1.06 round or 3/8 to
	11/16 square
	(10 to 27 round or 10 to 18
	square)
Shaft Adapter Type	Self-centering clamping
Supply Voltage	100 to 250 Vac
Materials	Aluminum housing, Plenum
	rated plastic access cover
Operating Humidity Range (% RH)	5 to 95% RH, non-condensing
Ambient Temperature Range	-40 F to 140 F (-40 C to 60 C)
Storage Temperature Range	-40 F to 158 F (-40 C to 70 C)
Weight	6 lb (2.72 kg)
Includes	Mounting bracket, self-
	centering shaft adapter, 3mm
	crank
Comments	Integral 1/2 in. NPSM conduit
	connection.
APPROVALS
CE	89/336/ECC, 73/23/EEC
C-Tick	N314
Underwriters Laboratories, Inc	UL873, Plenum Rated
Canadian Underwriters
Laboratories, Inc	cUL C22.2 No. 24-93

FEATURES

•Brushless DC sub-motor with electronic stall protection for floating/modulating models.

•Brush DC sub-motor with electronic stall protection for

2-position models.

•Self-centering shaft adapter (shaft coupling) for wide range of shaft sizes.

•Models available for use with two-position, single pole single throw (SPST), line- (Series 40) or low- (Series 80) voltage controls.

•Models available for use with floating or switched single- pole, double-throw (SPDT) (Series 60) controls.

•Models available for use with proportional current or voltage

(Series 70) controls.

•Models available with combined floating/modulating control in a single device.

•Models available with adjustable zero and span.

•Models available with line-voltage internal end switches.

•Access cover to facilitate connectivity.

•Metal housing with built-in mechanical end limits.

•Spring return direction field-selectable.

•Shaft position indicator and scale.

•Manual winding capability with locking function.

•UL (cUL) listed and CE compliant.

•All models are plenum-rated per UL873.

DIMENSIONS DIAGRAMS

3-15/16 (100)

1-9/16 1-9/16

(40)(40)

1-9/16

(40)

9-3/4

(247)

6-1/8

(156)

1/4 (6)	2-15/16 (75)
		M20952

84