Honeywell MS4103 manual M7164, 110

Modutrol IV Motor

M7164

Series 71 Modutrol IV™ Motors non-spring return motors used to control dampers and valves. These motors accept a voltage signal from an electronic controller to position a damper or valve at any point between open and closed.

SPECIFICATIONS
Application Type	Damper; Valve
Fail Safe Mode	Non-Spring Return
Control Signal	Modulating, 10.5-13.5 Vdc
Torque/Force	60 lb-in. (6.8 Nm)
External Auxiliary Switches Available ..	Yes
Auxiliary Switch Ratings
AFL - 120 Vac	7.2A
Auxiliary Switch Ratings
ALR - 120 Vac	43.2A
Auxiliary Switch Ratings
AFL - 240 Vac	3.6A
Auxiliary Switch Ratings
ALR - 240 Vac	21.6A
Feedback	No
Electrical Connections	Quick-connect terminals
Frequency	50 Hz, 60 Hz
Mounting	Foot-mounted
Motor Shafts	Dual-ended shaft
Shaft Shape	Square
Shaft Dimensions	0.375 in. (10 mm)
Deadweight Load on Shaft
(Either End)	200 lb.
Deadweight Load
(Combined on both Shafts)	300 lb.
Ambient Temperature Range	-40 F to 150 F (-40 C to 60 C)
Weight	6.5 lb
APPROVALS
Canadian Standards Association	Certified: File No. LR1620,
	Guide No. 400-E
CE	EN55011 (Emission) EN50082-
	2 (Immunity) 73/23/EEC (LVD)
Underwriters Laboratories, Inc	Listed File: E4436, Guide:
	XAPX

ACCESSORIES

Q7230A1005—Interface module, provides adjustable zero & span, voltage or current control

220736A—Internal Auxiliary Switch Assembly - 1 Switch 220736B—Internal Auxiliary Switch Assembly - 2 Switches

50017460-001—24/120/230 Vac Internal Transformers for Series 2 Motors

50017460-003—120 Vac Internal Transformers for Series 2 Motors 4074ERU—Weatherproofing kit. Protects motor from driving rain when

mounted in any position 221455A—Infinitely adjustable Motor Crank Arm

FEATURES

•Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.

•Motor and circuitry operate from 24 Vac.

•Quick-connect terminals are standard--screw terminal adapter is available.

•Adapter bracket for matching shaft height of older motors is available.

•Motors have field adjustable stroke (90 to 160 degrees).

•Integral auxiliary switches are available factory mounted, or can be field added.

•All models have dual shafts (slotted and tapped on both ends).

•All models have auxiliary switch cams.

•Fixed torque throughout the entire voltage range.

DIMENSIONS DIAGRAM

TOP VIEW
		4-7/8
		(124)
		4-5/
		(116
		5-1/2
		(140)
1/4	13/16
	(20)
(7)	13/16
2	(20)
3	4-1/16 (103)	1-1/2 (37)
4-1/16 (103)
1-1/2 (37)
		JUNCTION
		BOX
		3/4
		(19)

		MOTOR
		6-7/16
		(164)
AUXILARY	POWER	5-3/8
END	END	(137)
		2-9/16
		(66)
9/16 (15)
	1
ADAPTER		3/4
		(19)
BRACKET

110