Honeywell SDC manual Display basic display

SDC / DHC Operation

4.1.1Display (basic display)

1
	C
2	5
3
4

1	Day of the week / Date	4	Operating mode symbols
2	Time	5	Heat generator temperature
3	Active operating mode

The illumination of the display is switched on by pressing any button or using the input button î and switches off automatically if no buttons are pressed for a longer period of time.

During start-up of the unit and after a power failure, a segment test with automatic fault diagnosis is carried out. The respective device type and the software version number then appear briefly.

The basic display that then appears shows the day of the week, the date, the time and the heat generator temperature in automatic mode. Different values appear in the basic display depending on the set operating mode (AUTOMATIC, PARTY etc.). Thus, for example, in the ABSENT operating mode, the indication ABSENT TIL appears instead of the date and the return date instead of the temperature. Active summer deactivation is indicated by a beach umbrella symbol À, and active frost protection is indicated by a snowflake symbol Á.

EN2H-0220GE51 R0308 13