Manuals / Honeywell / Household Appliance / Thermostat

Honeywell SDC manual Holiday mode

Models: SDC

1 64

Download 64 pages 29.07 Kb

Page 24

Operation	SDC / DHC

4.1.2.6.1Holiday mode

In holiday mode, the heating circuits can be switched off and protected from frost or operated based on the settings for the RED. HEATING operating mode for the duration of the holiday based on the presetting ("Direct circuit" or "Mixed heating circuit 1" / "Mixed heating circuit 2" menu, parameter 25 = holiday operating mode).

Setting ► Press button.

The menu-selection level Switching time programs / Holiday programs appears in the display.

► Turn input button î to the left. HOLIDAY appears in the display.

► Press input button î.

HOLIDAY 01 appears in the display.

►Press input button î.

The year flashes in the display.

►Set year with the input button î.

►Press input button î.

The day on which the holiday is to begin flashes in the display.

►Set the day the holiday will begin with the input button î.

►Press input button î.

TIL - - appears in the display.

►Set the day you will return from holiday with the input button î.

►Press input button î.

The desired holiday timeframe is saved.

You can now enter additional holiday timeframes (up to 15 holiday blocks).

Application Longer absence while heating operation is active.

24	EN2H-0220GE51 R0308

Image 24

Honeywell SDC manual Holiday mode

Contents

Heating Controller SDC Remote Heating Controller DHC EN2H-0220GE51 R0308 Contents Contents LogSDC / DHC Page Software version Intended usePower supply Cable installationConnection conditions Cable cross-sectionsHot-water temperature greater than 60 C Grounding and zeroingSDC / DHC Type Burnerstage 2 or Districtheating valve ClosedSDC 12-31 Operation Display and operating elementsDisplay basic display Daytime room temperature button Factory settingSetting range Operating elements Input button press / turnNight-time room temperature button SettingDaytime hot-water temperature button Factory setting 50 COperating mode button basic display Absent 2.5.1 Setting Application Absence mode short-term programParty mode short-term program P1 P2, P3Automatic mode Display Disabling / enabling default program P2 to P3 Disabling / enabling default programs P2 to P3Enabling Manual summer operation excluding heating operationContinuous heating operation Continuous lowering operationStandby mode Switching time programs / Holiday programs buttonHoliday mode Factory setting Current date System information button Operating overview Setting range Factory setting Manual mode / Emission measurement buttonCancellation 2.9 Setting Setting range Heating curve Menu-selection level Menu functions are described in the following Access Time Date menuReturning Timeprograms menu Access Returning Selection of the control circuit Selection of the programSelection of day of the week and cycle Switch-off time Cycle temperature Switching time programming programs P2 and P3 disabled DHWDefault switching time program P1 for heating and hot water Default program P1Switching time programming program P2 and P3 enabled Default program P2 Default program P3Copying switching time programs days Source day Target day Calling up the copy function daysCalling up the copy function heating circuits Block programming SDC / DHC Copying heating circuits Reloading default programs SDC / DHC Reloading default programs Switching time programs P2 and P3 enabled System Parameters menu Access Returning Setting values DEFactory setting German Language selectionOperating mode Setting range Set values Time programSet values 30 C Quick increase in outside temperature Slow increase in outside temperatureSummer / Heating limit Factory setting 20 C Parameter resetUndoing deactivation Night-time hot-water temperature Factory setting 40 CDHW menu Reduced operation Set values RED lowering operationECO switch-off operation Heating systemRadiator systems Log Time Setpoint Opt Wed Cont. circuit Thu Fri Sat SunSDC / DHC SDC / DHC Page Automation and Control Solutions