Honeywell SDC manual Time Date menu, Access, Returning

SDC / DHC Operation

4.2.1"Time - Date" menu

	The following current calendar values can be specified in this
	menu:
	•	Time
	•	Year
	•	Day - Month
	• Time change mode (summer / winter time)
NOTE	All listed daytime values are set at the factory and generally do
	not need to be updated.
	An internal, pre-programmed calendar ensures automatic time
	change on the annually recurring summer / winter time switchover
	dates. If necessary, the automatic time change can be
	deactivated. The current weekday, Mo to Su is determined from
	the calendar date and does not need to be set.
Application	Corrections for rare fault cases
Access	See 4.2 Menu-selection level, pg. 31
Setting	► Turn input button î and select the "Time - Date" menu.
	► Turn input button î and select the desired calendar value
		(time, year, day - month, change).
	► Press input button î and change the corresponding value by
		turning the input button î.
	► Press input button î to confirm the set value.
	► Turn input button î to select and change additional calendar
		values.
Returning	Returning to the basic display takes place by pressing the
	button or automatically after the set information time (see
	4.1.2.7 "System information" button, pg. 26).

EN2H-0220GE51 R0308 33