3If you are making more than one copy, press the Plus (+) button or the Number of Copies button followed by the Plus (+) button until the appropriate number is displayed on the front panel.

4Adjust the way your copy will look using the Copy Quality, Reduce/Enlarge, Lighter/Darker, and Color Intensity buttons. See “Controlling How Copies Will Look” later in this chapter for details.

5Start copying:

Press the Black button to make a black and white copy.

Press the Color button to make a color copy.

Controlling How Copies Will Look

You can change default copy settings to produce copies that look the way you want them to.

NOTE There is a small margin around the edge of paper that the HP Color Copier cannot copy onto. See “Copy Margins” on page 9-1 for more information.

This section explains how to use the following settings and options:

Number of copies

Copy quality

Reduce/enlarge features

Paper types

Lighter/darker

Color intensity

Text enhancement (TE)

Enhance light colors (ELC)

Copy paper size

Set defaults

NOTE The copy settings are reset to their default settings two minutes after each copy job is complete.

TIP If you consistently use front panel settings other than the default, consider establishing those settings as your new “defaults.” See “Set Defaults” on page 3-9 for more information.

HP Color Copier User’s Guide 3-3