5If all else fails, remove the paper tray by pinching together the two levers under the paper tray. Pull the tray toward you, and gently remove the jammed paper. Then slide the paper tray back into the copier.

6Turn the copier off, then on again to continue copying.

If paper has jammed in the copier, but no message is displayed, press and hold down the Select/Resume button, then the Paper Type button. Then follow the directions above.

How to Clear a Paper Jam in the Automatic Document Feeder

1Rotate the automatic document feeder back to expose the paper jam.

2Gently remove the paper.

3Rotate the automatic document feeder back.

4Press Select/Resume to continue.

How to Use the Self Test Page

The Self Test Page lets you know whether the copier is operating properly. It lists current, default front panel settings and, if you are using Model 145 or 155, tells whether the automatic document feeder is attached properly. You can also use it to check print alignment.

To print a Self Test Page:

1Press the Menu button until the message “Self Test Page” appears in the panel display.

2Press the Select/Resume button.

The test-page printout has a set of lines which should appear unbroken, and colored bars which should appear solid. The intensity of the colors will vary, depending on the type of paper you are using (that is, plain paper, HP Premium InkJet Paper, and so on).

5-2Troubleshooting