To clean the glass:

1Turn off the HP Color Copier, remove the power cord, and then raise the document cover.

2Clean the glass with a soft cloth or sponge slightly moistened with warm water and a mild soap or detergent. You may also use glass cleaner.

CAUTION Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass; these can damage the glass.

Do not place liquids directly on the glass. They may seep under it and damage your copier.

3Rinse the soft cloth or sponge with clean water, wring out excess water, and wipe the remaining soap or detergent off the glass.

4Dry the glass with a chamois or cellulose sponge to prevent spotting. If soap or detergent does not clean the glass sufficiently, you can use isopropyl alcohol as a cleaning agent.

Aligning Cartridges

Use the Align Cartridges feature whenever you install new print cartridges. See “Step 8 — Align Your Black and Color Print Cartridges” on page 2-10 for step-by-step instructions.

Using the Self Test Page

Use the Self Test Page to check the print cartridges and to determine whether the automatic document feeder is successfully installed.

To Print a Self Test Page:

1Press the Menu button repeatedly until you see “Self Test” on the front panel display.

2Press Select/Resume.

The message “Printing” appears on the front panel display, and a Self Test Page will be printed. See “How to Clear a Paper Jam in the Automatic Document Feeder” on page 5-2 for more information.

7-2Maintaining Your HP Color Copier