Special Considerations When Using Transparency Film

Load a maximum of 80 transparency sheets at a time.

Be sure to specify “Transparency” as the Paper Type setting.

Ink dries slower on film. Be sure to allow enough time for the ink to dry before using the transparency.

If you are copying from a transparency (that is, your original is printed on transparency film), place a blank piece of paper over the transparency on the copier glass.

NOTE We recommending using only HP Premium Transparency Film when copying on transparencies. Other transparency film can jam in the copier.

Automatic Document Feeder Requirements

Load a maximum of 25 originals in the automatic document feeder at a time.

Use only originals printed on plain paper (white and colored),

letterhead, and HP Premium Inkjet Paper in the 1624 lb (6090 g/m2) range in the automatic document feeder.

Always insert originals with the printed-side facing back in the feeder and the top of the paper to the right.

Do not start copying until the “Document loaded” message appears on the front panel display and you see the Copy Quality lights flash.

NOTE Do not load photos, paper sizes other than letter or A4, photo paper, transparency film, labels, or envelopes in the automatic document feeder. Doing so may cause a paper jam.

How to Order Quality HP Papers

You can order your copier supplies from any local, authorized

HP dealer. See page 9-4 for more information.

4-4All About Paper