3Press the Menu button until “Set Defaults” appears on the front panel display.

4Press the Select/Resume button. The message “Current settings saved as defaults” is displayed. (This step saves the new setting—Auto Fit—as your default.)

Factory Defaults

You can return all the control panel settings to their factory defaults at one time.

To return to Factory Defaults:

1Press the Menu button repeatedly until you see “Factory Defaults” on the front panel display.

2Press Select/Resume.

The message “Returned to factory defaults” appears on the front panel display.

Clear/Stop

Use the Clear/Stop button to cancel copy settings you have specified or to stop copying.

When you press the Clear/Stop button to cancel copy settings, they are reset to default settings.

When you press the Clear/Stop button to stop copying, the phrase “Copy Cancelled” appears on the front panel display. After a few seconds, the copier cancels the job.

3-10Copying