‹Auto Fit pre-scans the original to determine where its edges are. Auto Fit then reduces or enlarges the original to fit on the paper you are copying onto.

When enlarging, Auto Fit increases the size of the copy to the largest size that will fit on the page without distorting the image, and centers the image on the page.

NOTE Use Auto Fit or Entire 91% to slightly reduce your original and ensure that you copy the entire page. Entire 91% is a faster solution, because it uses a fixed percentage to make the copy—no pre-scan is needed to calculate the size of the original. Auto Fit is an easy solution—the Auto Fit feature calculates the reduction percentage for you.

‹Custom 100% (– +) lets you specify (using the plus or minus buttons) the exact reduction or enlargement percentage to use. You can specify any percentage between 25% and 400%.

‹Poster 400% (– +) determines how to divide up the original image and enlarge each part to end up with an image that is up to 400% larger than your original. You can specify a different percent total enlargement using the Minus (– ) or Plus (+) buttons. A poster may be created using up to 25 sheets of paper (5 sheets wide by 5 sheets long).

For example, you can use Poster to create posters of your work to hang in your office or store. Use HP Premium Photo Paper for a glossy, near-photo-quality look.

NOTE There is a minimum 1/4-inch overlap on all pages of the poster. This ensures that key elements on the page do not get cut off, and makes it easy for you to paste the pages together.

‹Clone 100% (– +) fits as many copies of the original as will fit on one sheet of the paper you are using. You can specify a reduction or enlargement using the Minus (– ) or Plus (+) buttons.

For example, you can use Clone to make extra copies of special photographs for family and friends. For glossy, near-photo-quality copies, use HP Premium Photo Paper.

HP Color Copier User’s Guide 3-5