HP 200 color MFP M276nw manual Redial pending, Fax storage is full, Canceling the fax receive

Control panel message	Description	Recommended action
Fax is busy.	The fax line to which you were sending a fax	Allow the product to retry sending the fax.
Redial pending.	was busy. The product automatically redials	Call the recipient to ensure that the fax
	the busy number.
		machine is on and ready.
		Check that you are dialing the correct fax
		number.
		Open the Service menu, and touch the Fax
		Service button. Touch the Run Fax Test
		button. This test verifies that the phone cord
		is connected to the correct port and that the
		phone line has a signal. The product prints a
		report with the results.
		If the error persists, contact HP. See
		www.hp.com/support/ljcolorm276series or
		the support flyer that came in the product
		box.
Fax storage is full.	During the fax transmission, the product ran	Print all of the faxes, and then have the
Canceling the fax receive.	out of memory. Only the pages that fit into	sender resend the fax. Have the sender
	memory will be printed.	divide the fax job into multiple jobs before
		resending. Cancel all fax jobs or clear the
		faxes from memory.

Fax storage is full. Canceling the fax send.

During the fax job, the memory filled. All pages of the fax have to be in memory for a fax job to work correctly. Only the pages that fit into memory were sent.

Cancel the current job. Turn the product off, and then turn it on again. Try sending the job again.

If the error reoccurs, cancel the job and turn the product off and then on a second time. The product might not have enough memory for some jobs.

ENWW Solve fax problems 111