Manual Duplex Load Tray 1, Press OK
Description
The first side of a manual duplex job has printed, and the page needs to be loaded to process the second side.
Recommended action
Load the page in the indicated tray with the side to be printed face up, and the top of the page away from you, and then press the OK button.
Memory is low. Press OK.
Description
The product memory is almost full.
Recommended action
Press the OK button to finish the job, or press the Cancel 
button to cancel the job.
Break the job into smaller jobs that contain fewer pages.
Misprint, Press OK
Description
Paper has been delayed as it moves through the product.
Recommended action
Press the OK button to clear the message.
To avoid this problem, try the following solutions:
1.Adjust the paper guides in the tray. Make sure the front paper guide is pushing the paper against the back edge of the tray.
2.Use paper that meets HP specifications. Store paper unopened in its original packaging.
3.Use the product in an area that meets the environmental specifications for this product.
Print failure, press OK. If error repeats, turn off then on.
Description
The product cannot process the page.
Recommended action
Press the OK button to continue printing the job, but output might be affected.
If the error persists, turn the power off and then on. Resend the print job.
ENWW | Interpret control panel messages 161 |