![](/images/new-backgrounds/1241665/24166553x1.webp)
4. Troubleshooting
Error & Status Messages on the Display Panel
❖ Status messages
Message | Status |
|
|
Hex Dump Mode | In Hex Dump mode, the machine receives data in hexadecimal |
| format. Turn off the machine after printing, and then turn back |
| on. |
|
|
Offline | The machine is offline. Set the machine online by pressing [On- |
| line] on the display panel to start printing. |
|
|
Please Wait | The machine is readying the development unit. Wait for a |
| while. |
|
|
Printing... | The machine is printing. Wait for a while. |
|
|
Ready | The default ready message. The machine is ready for use. No |
| action is required. |
|
|
Resetting Job... | The machine is resetting the print job. Wait until “Ready” ap- |
| pears on the display panel. |
|
|
Waiting... | The machine is waiting for the next data to print. Wait for a |
| while. |
|
|
❖ Alert messages
Messages/Second messages | Description | Solution |
|
|
|
Close duplex unit cover. | The cover of the duplex unit is | Close the cover of the duplex |
| open. | unit. |
|
|
|
Collate has been cancelled. | The collate print function has | Increase memory capacity. |
| been cancelled. | When adding a memory mod- |
|
| ule to the machine, contact |
|
| your sales or service represen- |
|
| tative. |
|
|
|
DIMM has a problem. | An error has occurred in the | Contact your sales or service |
| DIMM inside the machine. | representative. |
|
|
|
21