Printer Features
❖Memory Usage
You can select the amount of mem- ory used in Font Priority or Frame Priority, according to paper size or resolution.
•Font Priority
This setting uses memory for registering fonts.
•Frame Priority
This setting uses frame memory for high speed printing.
Note
❒ Default: Frame Priority
❖Duplex
You can select to have print on
5 | both sides of each page. |
•Off
•Short Edge Bind
•Long Edge Bind
Note
❒Default: Off
❖Toner Saving
You can this to enable Toner Sav- ing.
•On
•Off
Note
❒Default: Off
❖Printer Language
Normally, the machine should be set to Auto. If the printer language cannot be detected in Auto, the language specified by Default Printer Language is selected.
• Auto
• PCL
• PS
Note
❒Default: Auto
❒PS appears only when the op- tional PostScript 3 board is in- stalled in the machine.
❖Copies
You can set the number of sets of prints. This setting is disabled if the number of pages to print has been specified with the printer driver or a command.
• 1 to 999 by 1
Note
❒Default: 1
❖Edge Smoothing
You can set this to enable Edge Smoothing.
• On
• Off
Note
❒Default: On
❒If Toner Saving is set to On, Edge Smoothing is ignored even if it is set to On.
❖Sub Paper Size
You can enable the Auto Substitute Paper Size (A4↔LT) feature.
•Auto
•Off
Note
❒ Default: Off
❖Page Size
You can select the default paper size.
• 11 ⋅ 17
• 8/⋅ 14
• 8/⋅ 11
• 5/ ⋅ 8/
• 71/4⋅10/
• 8⋅13
• 8/⋅13
40
