HP 3300 manual Parameter Description Wireless Status, Ssid

Chapter 4

(continued)
Parameter	Description
Wireless Status	Status of the wireless network:

●Connected: The HP All-in-One is connected to a wireless LAN and everything is working.

●Disconnected: The HP All-in-One is not connected to the wireless LAN due to incorrect settings (such as the wrong WEP key), the HP All-in-One is out of range, or an Ethernet cable is plugged in and connected to an active network.

●Disabled: The radio is turned off.

●Not applicable: This parameter does not apply to this network type.

Communication	An IEEE 802.11 networking framework in which devices or
Mode	stations communicate with each other:
	● Infrastructure: The HP All-in-One communicates with other
	network devices through a wireless access point, such as a
	wireless router or base station.
	● Ad hoc: The HP All-in-One communicates directly with each
	device on the network. No wireless access point is used. This
	is also called a peer-to-peer network. On Macs, ad hoc mode
	is called computer-to-computer mode.
	● Not applicable: This parameter does not apply to this
	network type.
Network Name	Service Set Identifier. A unique identifier (up to 32 characters) that
(SSID)	differentiates one wireless local area network (WLAN) from
	another. The SSID is also referred to as the network name. This is
	the name of the network to which the HP All-in-One is connected.

Signal

Strength (1-5)

Network setup

The transmitting or return signal graded on a scale of 1 to 5:

●5: Excellent

●4: Good

●3: Fair

●2: Poor

●1: Marginal

●No signal: No signal detected on the network.

●Not applicable: This parameter does not apply to this network type.

82 HP Photosmart 3300 All-in-One series