3.On the left side of the product, release the innermost tab (callout 1) at the center of the gear, and then remove the gear (callout 2).

NOTE: The gear is composed of two pieces. Releasing the outer tab does not remove the entire gear assembly and exposes an internal spring in the gear.

Figure 1-4Remove the MP tray separation pad (1 of 5)

 

1

3

2

 

Reinstallation tip Press and hold back the gear arm (callout 3) when reinstalling the pickup gear.

4.In the toner cartridge cavity, pull back the pickup roller cover, and then use a small flat-blade screwdriver to release the tab (callout 1) on the pickup roller shaft.

Figure 1-5Remove the MP tray separation pad (2 of 5)

1

ENWW

Removal and replacement procedures

7