7.Disconnect three connectors (callout 1), remove two screws (callout 2), and then remove the fuser (callout 3).

Figure 1-41Remove the fuser (5 of 5)

2

3

1

Face down drive or duplex drive assembly

Simplex products have a face-down-drive assembly installed. Duplex products have a duplexing-paper- feed assembly installed.

These components appear identical from the outside, but they have different internal gears and functions. The same procedure is used to remove either component.

1.Remove the following components:

●Tray 2 cassette

●Right cover. See Right cover on page 12.

●Left cover. See Left cover on page 11.

●Top cover assembly. See Top cover with touchscreen control-panel module on page 16 or Top cover with LCD control-panel module on page 13.

2.Open the toner cartridge door and the rear jam access door.

32 Chapter 1 Removal and replacement

ENWW