3.Disconnect three connectors (callout 1), and then remove one screw (callout 2) to remove the driver PCA.

Figure 1-75Remove the optional paper feeder driver PCA (2 of 2)

2

1

Optional paper feeder paper sensor PCA

1.Remove the right cover.

2.On the right side of the unit, remove one screw (callout 1), release one tab (callout 2) from the driver PCA cover (callout 3), and then slide the PCA cover to the right to remove it.

Figure 1-76Remove the optional paper feeder paper sensor PCA (1 of 4)

3

2

1

ENWW

Removal and replacement procedures 55