Covers and control panel

Left cover

NOTE: No tools are necessary to remove this cover. However, a small flat-blade screwdriver might be helpful in releasing some of the tabs that hold the cover to the product chassis.

1.Remove the Tray 2 cassette.

2.Open the toner cartridge door and the rear jam access door.

3.Grasp the front edge of the cover, and then pull the cover toward the front to release the four tabs (callout 1).

Figure 1-12Remove the left cover

1

4.With the top and front edges loose, carefully slide the cover toward the back of the product, and then remove it.

ENWW

Removal and replacement procedures 11