Motors and fans

Main motor

1.Remove the following components:

●Tray 2 cassette

●Right cover. See Right cover on page 12.

●Left cover. See Left cover on page 11.

●Top cover assembly. See Top cover with touchscreen control-panel module on page 16 or Top cover with LCD control-panel module on page 13.

●Rear cover, rear door, and duplex-paper-feed assembly. See Rear cover, rear door, and feed assembly on page 20.

●Fuser. See Fuser assembly and paper feed guide on page 29.

●Engine controller assembly (DC controller). See Engine controller assembly (DC controller) PCA on page 41.

2.Open the toner cartridge door and the rear jam access door.

3.At the rear of the product, release the cables (callout 1) from the cable guides (callout 2), and then pull out the paper feed assembly (callout 3).

Figure 1-47Remove the main motor (1 of 4)

3

1

2

ENWW

Removal and replacement procedures 37