2.On the left side of the product, release two tabs (callout 1), pull the lower left-hand corner of the PCA to disconnect the connector on the back of the PCA, and then pull the PCA away from the product.

Figure 1-66Remove the wireless PCA

1

Power switch PCA

The power switch PCA is located in the product front cover.

1.Remove the following components:

●Tray 2 cassette

●Right cover. See Right cover on page 12.

●Left cover. See Left cover on page 11.

●Cartridge door and front cover assembly. See Cartridge door and front cover assembly on page 23.

ENWW

Removal and replacement procedures 49