4.On the right side of the product, remove two screws (callout 1). Figure 1-20Remove the top-cover assembly (2 of 3)

1

5.On the top-cover assembly, remove three screws (callout 1).

NOTE: The screw behind the control panel has a protective cover over it. Remove the cover to remove the screw, but keep the cover in order to reinstall it after installing the control panel.

Figure 1-21Remove the top-cover assembly (3 of 3)

1

6.Lift the top-cover assembly off of the product to remove it.

ENWW

Removal and replacement procedures 17