4.Remove one screw (callout 1), and then remove the Tray 1 pickup solenoid. Figure 1-45Remove the Tray 1 pickup solenoid (2 of 2)

1

Duplex solenoid

NOTE: This section applies to duplex models only.

1.Remove the following components:

●Tray 2 cassette

●Right cover. See Right cover on page 12.

●Left cover. See Left cover on page 11.

●Rear cover, rear door, and duplex-paper-feed assembly. See Rear cover, rear door, and feed assembly on page 20.

●Top cover assembly. See Top cover with touchscreen control-panel module on page 16 or Top cover with LCD control-panel module on page 13.

●Fan. See Fan on page 39.

2.Open the toner cartridge door and the rear jam access door.

ENWW

Removal and replacement procedures 35