Rear cover, rear door, and feed assembly

CAUTION: The fuser can be hot while the product is in use. Wait for the fuser to cool before working in that area.

1.Remove the following components:

●Tray 2 cassette

●Right cover. See Right cover on page 12.

●Left cover. See Left cover on page 11.

2.Open the toner cartridge door and the rear jam access door.

3.Duplex models only: At the front of the product, in the Tray 2 cassette cavity, pull down on the green duplex-paper-feed-assembly release tab (callout 1), and then lower the assembly (callout 2).

Figure 1-25Remove the rear cover, rear door, and feed assembly (1 of 3)

21

20 Chapter 1 Removal and replacement

ENWW