Top cover with LCD control-panel module

1.Remove the following components:

●Tray 2 cassette

●Right cover. See Right cover on page 12.

●Left cover. See Left cover on page 11.

2.Open the toner cartridge door and the rear jam access door.

3.On the left side of the product, disconnect one flat cable (callout 1) from the formatter. Figure 1-14Remove the top-cover assembly and LCD control-panel module (1 of 3)

1

4.At the rear and on the right side of the product, remove three screws (callout 1). Figure 1-15Remove the top-cover assembly and LCD control-panel module (2 of 3)

1

ENWW

Removal and replacement procedures 13