Right cover

NOTE: No tools are necessary to remove this cover. However, a small flat-blade screwdriver might be helpful in releasing some of the tabs that hold the cover to the product chassis.

1.Remove the Tray 2 cassette.

2.Open the toner cartridge door and the rear jam access door.

3.Grasp the rear edge of the cover, and then pull that edge toward the rear to release the four tabs (callout 1).

Figure 1-13Remove the right cover

1

4.With the back and top edges loose, carefully slide the cover toward the front of the product, and then remove it.

12 Chapter 1 Removal and replacement

ENWW