6.Pull up on the top edge of the separation pad to release it from the product. Figure 1-8Remove the MP tray separation pad (5 of 5)

Reinstallation tip When reinstalling the pickup roller shaft assembly, make sure that the flat part of the pickup roller is directly over the separation pad.

Tray 2 and optional Tray 3 pickup roller

1.Remove the tray cassette from the product.

2.Locate the pickup roller at the top of the cassette cavity. On the left roller holder, release the tab (callout 1), and then turn the holder away from you.

Figure 1-9Remove the Tray 2 or Tray 3 pickup roller (1 of 2)

1

ENWW

Removal and replacement procedures

9