4.At the rear of the product, remove five screws (callout 1), release one tab (callout 2) near the bottom corner, and release two tabs (callout 3) from under the top cover assembly.

Figure 1-26Remove the rear cover, rear door, and feed assembly (2 of 3)

3

1 1

2

5.Carefully separate the rear cover and rear door from the product, and then remove them.

NOTE: For the duplex models, the duplex-paper-feed assembly is removed with the cover and door

Reinstallation tip When you reinstall the rear cover assembly, open the rear door to make sure that the rear cover fits even against the product chassis before you install the mounting screws.

ENWW

Removal and replacement procedures 21