6.Remove three black-screws (callout 1) and one silver-screw (callout 2), release two tabs (callout 3), and then remove the main motor (callout 4) and the cable guide (callout 5) together.

Figure 1-50Remove the main motor (4 of 4)

2

3

4

5 1

Reinstallation tip Remember the location from where you removed the silver screw. The silver screw needs to be reinstalled in the same place.

Fan

1.Remove the following components:

●Tray 2 cassette

●Right cover. See Right cover on page 12.

●Left cover. See Left cover on page 11.

●Top cover assembly. See Top cover with touchscreen control-panel module on page 16 or Top cover with LCD control-panel module on page 13.

2.Open the toner cartridge door and the rear jam access door.

ENWW

Removal and replacement procedures 39