HP 5000 Router manual Lists the attributes of the Router 5000 Family AUX port, Ground

Router 5000 Family Hardware 7

Table 4 lists the attributes of the Router 5000 Family AUX port.

Table 4 Router 5000 Family AUX Port Specifications

Attribute	Description
Connector type	RJ-45
Interface standard	Asynchronous EIA/TIA-232
Baud rate	300 to 115.2 kbps
Services supported	Modem dial-up
Backup	Operating as the console port when the CON
	fails
Protocols supported	PPP
SLIP	MP

Table 5 lists the attributes of the Router 5000 Family Ethernet port.

Table 5 Router 5000 Family Ethernet Port Specifications

Attribute	Description
Connector type	RJ-45
Interface type	MDI
Frame format supported	Ethernet _ II
Ethernet _ SNAP	IEEE 802.2
IEEE 802.3	Operating mode
10/100BASE-T Mbps autosensing	Full duplex/half duplex
Network protocol supported	IP, Novell IPX

Power Supply and	Table 6 lists specifications for the Router 5000 Family power supply and protection
Protection Ground	ground.

Table 6 Router 5000 Family Power Supply and Protection Ground

Item	Description
Power supply input	Rated Voltage: 100-240V, a.c. 50/60Hz
	Max. voltage 90-264V a.c.50/60Hz
Protection ground	Connecting to ground through ground wire.

LEDs Table below describes the LEDs on the Router 5012

POWER	ON — The module (MIM or SIC) is operating
	normally.
	OFF — No module is installed in the current
	slot or the MIM is not operating normally.
SYSTEM	Flashing-unit is operating normally
	OFF-power is Off
WAN	Flashing-data is being transmitted from local
	WAN port
	OFF-no data transmitted on WAN port
LAN	Flashing-Data is being transmitted on local
	Ethernet port
	OFF-no data is being transmitted on local
	Ethernet port