Note Make sure the scanner has returned to its parked position before turning off the HP all-in-one.
6Press the On button to turn off the HP all-in-one.
7Unplug the power cord, and then disconnect it from the HP all-in-one. Do not return the power cord with the HP all-in-one.
Warning The replacement HP all-in-one will not be shipped with a power cord. Store the power cord in a safe place until the replacement HP all-in-one arrives.
8Remove the control panel overlay as follows:
a Place your hands on each side of the control panel overlay. b Use your thumbs to pry the control panel overlay off.
9Retain the control panel overlay. Do not return the control panel overlay with the HP all-in- one.
Warning The replacement HP all-in-one might not come with a control panel overlay. Store your control panel overlay in a safe place, and when the replacement HP all-in-one arrives, reattach your control panel overlay. You must attach your control panel overlay to use the control panel functions on the replacement HP all- in-one.
Note See the Setup Guide that came with your HP all-in-one for instructions on how to attach your control panel overlay. The replacement HP all-in-one might come with instructions for setting up your device.
10If available, pack the HP all-in-one for shipment by using the original packing materials or the packaging materials that came with your exchange device.