Note If you need printed confirmation each time a fax is sent, follow these instructions before sending any faxes and select Send Only.
1Press Setup.
2Press 2, and then press 1.
This selects Print Report and then selects Fax Report Setup.
3Press 
to scroll through the following report types:
–Every Error: prints whenever there is any kind of fax error (default).
–Send Error: prints whenever there is a transmission error.
–Receive Error: prints whenever there is a receiving error.
–Every Fax: confirms every time a fax is sent or received.
–Send Only: prints every time a fax is sent indicating whether the fax was successfully sent or not.
–Off: does not print any error or confirmation reports.
4Press OK to select the report.
Generate reports manuallyYou can manually generate reports about your HP
1Press Setup, and then press 2. This selects Print Report.
2Press 
to scroll through the following report types:
–1: Fax Report Setup: prints the automatic fax reports as described in Generate reports automatically.
–2: Last Transaction: prints details of the last fax transaction.
–3: Fax Log: prints a log of approximately the last 30 fax transactions.
–4: Speed Dial List: prints a list of programmed
–5:
3Press OK to print the report.
Set up speed dialing
You can assign
The first five
For information on sending a fax using speed dials, see Send a fax using speed dials.
You can quickly and easily set up
You can create
User Guide | 87 |