We do not recommend printing to the following papers:

●Paper with cutouts or perforations (unless specifically designed for use with HP inkjet devices).

●Highly textured stock, such as linen. It may not print evenly, and the ink can bleed into these papers.

●Extremely smooth, shiny, or coated papers not specifically designed for your HP all-in-one. They can jam the HP all-in-one or repel the ink.

●Multi-part forms (such as duplicate and triplicate forms). They can wrinkle or get stuck. The ink is also more likely to smear.

●Envelopes with clasps or windows.

●Banner paper.

We do not recommend copying to the following papers:

●Any size paper other than letter, A4, 10 by 15 cm (4 by 6 inch), 5 by 7 inch, Hagaki, L, or legal. Depending on your country/region, some of these papers might not be available to you.

●Paper with cutouts or perforations (unless specifically designed for use with HP inkjet devices).

●Envelopes.

●Banner paper.

●Transparency film other than HP Premium Inkjet Transparency Film or HP Premium Plus Inkjet Transparency Film.

●Multiple-part forms or label stock.

Load paper

This section describes the procedure for loading different types and sizes of paper into your HP all-in-one for your copies, printouts, or faxes.

Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a resealable bag. If the paper is not stored properly, extreme changes in temperature and humidity might result in curled paper that does not work well in the HP all-in-one.

Load full-size paper

You can load many types of letter, A4, or legal paper into the input tray of your HP all- in-one.

To load full-size paper in the input tray

1 Remove the output tray, and slide the paper-width guide to its outermost position.

User Guide

27