Chapter 10

Back view of the HP all-in-one

1Telephone wall jack

2"IN" phone port on your computer

3"OUT" phone port on your computer

4 Telephone

5 Answering machine

6Computer with modem

7Phone cord supplied in the box with your HP all-in-one connected to the "1-LINE" port

To set up your HP all-in-one to a computer with two phone ports

1Remove the white plug from the port labeled "2-EXT" on the back of your HP all- in-one.

2Find the phone cord that connects from the back of your computer (your PC modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled "2-EXT" on the back of your HP all-in-one.

3Unplug your answering machine from the telephone wall jack, and connect it to the "OUT" port on the back of your PC modem.

This allows a direct connection between the HP all-in-one and your answering machine, even though the PC modem is connected first in line.

Note If you do not connect your answering machine in this way, fax tones from a sending fax machine might be recorded on your answering machine, and you might not be able to receive faxes with your HP all-in-one.

4Using the phone cord supplied in the box with your HP all-in-one, connect one end to your telephone wall jack, then connect the other end to the port labeled "1- LINE" on the back of your HP all-in-one.

Caution If you do not use the supplied cord to connect from the telephone wall jack to your HP all-in-one, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. If the supplied phone cord

70

HP Officejet 6200 series all-in-one