HP 7000 dl Router Features, Specifications

Introduction to the ProCurve Secure Router ProCurve Secure Router Installation Guide

If needed, an ISDN BRI U Backup Module, ISDN BRI S/T Backup Module, or Analog Modem Backup Module can plug onto any narrow interface module, providing backup capability. Refer to Installing Interface and Backup Modules on page 38 for more details.

For VPN applications using the ProCurve Secure Router, the optional 7100/7200 IPSec Module and 7100/7200 IPSec Base Module provide or activate encryption/decryption and security services. Refer to Installing the Encryption Module on page 40. The installation of the optional encryption module enables the software features associated with the VPN services.

Features

The ProCurve Secure Routers have the following features:

•Modular network interface via module (card) slots

•1U-high metal chassis with two or three slots for option modules

•Two integrated 10/100BaseT Ethernet ports (RJ-45 with auto-MDIX)

•Layer 2 WAN Protocol: Frame Relay, Multilink Frame Relay, PPP, Multilink PPP, HDLC

•Integrated IP router with bridging

•RIP Versions 1 and 2, OSPF, and BGP

•IP encapsulation over Frame Relay (RFC1490)

•Secure Router Operating System (SROS) Command Line Interface (CLI)

•SNMP management

•Web GUI

•Integrated EIA-232 DTE configuration port (DB-9)

•Optional backup modules available

•Optional 7100/7200 IPSec Module and 7100/7200 IPSec Base Module provide encryption/decryption and security services

•Front panel LEDs

•Mountable in a 19-inch rack

•Worldwide auto-ranging AC power supply

Specifications

The ProCurve Secure Routers have the following specifications:

Physical

	ProCurve Secure Router 7102dl	ProCurve Secure Router 7203dl
Width	44.25 cm (17.42 in)	44.25 cm (17.42 in)
Depth	29.26 cm (11.52 in)	29.26 cm (11.52 in)
Height	4.39 cm (1.73 in)	4.39 cm (1.73 in)
Weight	4.66 kg (10.26 lbs)	4.98 kg (10.95 lbs)

10 Copyright 2006 Hewlett-Packard Development Company, LP 5990-3760