ProCurve Secure Router Installation Guide

Option Modules

 

 

1xADSL2+ Annex B Interface Module

The 1xADSL2+ Annex B Interface Module (see Figure 13) adds ADSL capability to the ProCurve Secure Router. Performance information is provided below. Refer to Table A-9 on page 46 for the pinouts. Refer to Table A-12 on page 47 for the backup connector pinouts. An optional backup module is required for backup applications.

Figure 13. 1xADSL2+ Annex B Interface Module

Features and Specifications

ADSL Interface

•ADSL over ISDN, Annex B

•Supported Standards:

– ITU G.992.1 – Annex B (G.dmt)

•RJ-11C (6-pin jack, inner pair)

ATM

•Multiple Protocol over AAL5 (RFC2684)

•ATM Forum UNI 3.1/4.0 PVC

•Up to 16 Virtual Circuits

•ATM Class of Service (UBR)

•PPP over ATM (RFC2364)

•PPP over Ethernet (RFC2516)

•ATM F5 OAM

Compliance

•EN 60950, IEC 60950

•EMC - see Electromagnetic Compatibility (EMC) Table on page 62

Physical

•Dimensions: 6.99 cm (2.75 in) W x 10.80 cm (4.25 in) D

ADSL1 Performance

•Max = 8 Mbps downstream and 800 kbps upstream

•Min = 224 kbps downstream and 32 kbps upstream

ADSL2 Performance

•Max = ~12 Mbps downstream and ~1 Mbps upstream

•Min = 224 kbps downstream and 32 kbps upstream

ADSL2+ Performance*

•Max = ~24.5 Mbps downstream and up to 2 Mbps upstream

•Min = 224 kbps downstream and 32 kbps

upstream

*ADSL2+ support is planned in a future software update.

Environmental

•Operating temperature: 0°C to 50°C (32°F to 122°F)

•Non-Operating Temperature: -20°C to 70°C (-4°F to 158°F)

•Relative Humidity: Up to 95 percent noncondensing at 30°C (86°F)

•Non-Operating Relative Humidity: Up to 95 percent noncondensing at 30°C (86°F)

•Altitude: Up to 3.05 km (10,000 ft)

5990-3760

Copyright 2006 Hewlett-Packard Development Company, LP

27