ProCurve Secure Router Installation Guide

Option Modules

 

 

2xISDN BRI U Interface Module

The 2xISDN BRI U Interface Module (see Figure 15) adds ISDN BRI (with U interface) capability to the ProCurve Secure Router. Refer to Table A-11 on page 46 for the pinouts. Refer to Table A-12 on page 47 for the backup connector pinouts. An optional backup module is required for backup applications.

Figure 15. 2xISDN BRI U Interface Module

Features and Specifications

Operating Mode

•Independent TE mode of operation for each interface

Features

•Line Rate: Network support for 128 kbps (2 B channels per interface)

•Switch Compatibility: Euro-ISDN

•Test Capability: Local and network loopbacks

Compliance

•EN 60950, IEC 60950

•EMC - see Electromagnetic Compatibility (EMC) Table on page 62

Physical

•Dimensions: 6.99 cm (2.75 in) W x 10.80 cm (4.25 in) D

Environmental

•Operating temperature: 0°C to 50°C (32°F to 122°F)

•Non-Operating Temperature: -20°C to 70°C (-4°F to 158°F)

•Relative Humidity: Up to 95 percent noncondensing at 30°C (86°F)

•Non-Operating Relative Humidity: Up to 95 percent noncondensing at 30°C (86°F)

•Altitude: Up to 3.05 km (10,000 ft)

5990-3760

Copyright 2006 Hewlett-Packard Development Company, LP

29