Option Modules

ProCurve Secure Router Installation Guide

 

 

8xSerial Wide Module

The 8xSerial Wide Module (see Figure 17) provides eight serial interfaces. Refer to Table A-7 on page 45 for the serial interface pinouts.

Note

Cable length for the 8xSerial Wide Module should not exceed 25 feet.

 

 

 

 

Note

Cables for the 8xSerial Wide Module must be ordered separately: V.35 DTE (J8757A) or

 

X.21 (V.11) DTE (J8755A).

 

 

Figure 17. 8xSerial Wide Module

Features and Specifications

Operating Modes

•Frame Relay/Multilink Frame Relay

•PPP/Multilink PPP

•HDLC

8xSerial Interfaces

•DTE operation only; no internal clock provided

•Clocking up to 10 Mbps for each interface

•Supported Standards: ISO 4903 (X.21), CCITT V.35 Synchronous (V.35)

•Provides eight V.35 of X.21 (V.11) electrical interfaces; additional adapter cables are available for purchase to provide the V.35 DTE (J8757A) and X.21 DTE (J8755A) interfaces

•Connector: 25-pin smart serial (DTE) connector

Compliance

•ETSI TBR 1, ETSI TBR 2

EN 60950, UL/CUL 60950, AS/NZS 60950, IEC 60950

•EMC - see Electromagnetic Compatibility (EMC) Table on page 62.

Environmental

•Operating Temperature: 0°C to 50°C (32°F to 122°F)

•Non-Operating Temperature: -20°C to 70°C (-4°F to 158°F)

•Relative Humidity: 95 percent noncondensing at 30°C (86°F)

•Non-Operating Relative Humidity: 95 percent noncondensing at 30°C (86°F)

•Altitude: Up to 3.05 km (10,000 ft)

Physical

•14.29 cm (5.63 in) W x 21.91 cm (8.63 in) D

32

Copyright 2006 Hewlett-Packard Development Company, LP

5990-3760