HP 980c (US/CAN), 792.se Make Compatible, To format a compact disc, To make your disc compatible

Product Information	Drive Specifications	Interfaces	Installation and Configuration
Drive Operation	Tips and Techniques	Software	Maintenance
Troubleshooting	Warranty and Support	Release Notes	Discontinued Products

Quick Format			Full Format
Can be performed on all CD and DVD			Only available for CD-RW, DVD+RW,
recordable discs			DVD-RW, and DVD-RAM media
Must be initially performed for all CD-R			Must be initially performed for all
and DVD-R media			CD-RW, DVD+RW, DVD-RW, and
			DVD-RAM media
To format a compact disc
	!	Caution Formatting a disc makes all previously recorded data
		inaccessible.
1.	Open HP DLA.
2.	If your system has more than one recorder you can select the drive you wish to
	use by clicking the Change button on the left of the screen.
3.	Click the Format button.
4.	Place your media in your optical recorder and wait for the drive to spin up.

NOTE: See Eject Button on page 70 for information on ejecting your recorder tray.

5.Click the Next button.

6.Set the options:

a.Type a label for the media (optional) by placing the cursor in the Volume label box and typing the name you wish.

b.Select the Format option (either Quick or Full).

c.If desired, select Enable Compression by clicking the option box until a check mark appears. (This compresses data with an approximate 2:1 compression ratio.)

7.Click Next.

NOTE:

●Media formatted with compression can only be read by a machine with HP DLA installed.

●Formatting a CD-R or DVD-R uses space on the media.

●If your CD-RW, DVD-RW or DVD-RAM disc has been used by another application, it may take HP DLA a little longer than normal to format the disc.

●If your drive is HP Fast Format capable (see your optical recorder’s User Guide for more information) HP DLA will automatically use the HP Fast Format feature when performing a Full Format of your disc. This feature allows you to read and write to your disc during the formatting process.

Make Compatible

The Make Compatible feature makes the uncompressed data on your CD-R media readable by virtually any CD-ROM drive.

Caution The Make Compatible feature closes your appendable disc

! making it impossible to write further information to that disc. Do not use this feature until you have finished copying files to your disc.

To make your disc compatible

1.Open HP DLA.

2.Insert your CD-R disc into the drive tray.

3.Click the Make Compatible button.

4.Click the Start button.

NOTE:

●Depending on the amount of information on the disc, this process may take a few minutes to complete and cannot be cancelled.

●When using discs formatted by Make Compatible on computers that don’t have HP DLA installed, long file names will be shortened and directories nested more than 30 folders deep will not be readable.

●Discs created with Make Compatible cannot be read by computers running in DOS mode.

●Once the Format operation is started, it cannot be cancelled.

hp dvd-writer dvd100i Technical Support Solutions Guide 10/25/01 HP DLA 2.5 ⇐ ⇒ 69