HP 732c (US), 740n (US), 792.se NOTE Improper connection of the power cable will damage the drive

Product Information	Drive Specifications	Interfaces	Installation and Configuration
Drive Operation	Tips and Techniques	Software	Maintenance
Troubleshooting	Warranty and Support	Release Notes	Discontinued Products

14.Locate an available power cable connector in the computer.

Power cable connectors usually have yellow, red, and black wires. If you do not have an available connector, you need to purchase a Y power connector from your computer dealer.

15.Plug the power cable into the back of the HP drive. The connector only fits one way. (See Figure 24.)

NOTE: Improper connection of the power cable will damage the drive.

16.Slide the HP drive completely into the drive bay.

17.Secure the HP drive into the drive bay with the screws (or rails, if your computer uses rails). (See Figure 25.)

Figure 25 Securing the Drive in the Bay

Figure 24 Power Connector on Drive Back

hp dvd-writer dvd100i Technical Support Solutions Guide 10/25/01 Installing the hp dvd-writer dvd100i Drive ⇐ ⇒ 41