HP 770k (LA), 740n (US), 732c (US) Installing the Hardware, Unplug the Computer, A Free Drive Bay

Product Information	Drive Specifications	Interfaces	Installation and Configuration
Drive Operation	Tips and Techniques	Software	Maintenance
Troubleshooting	Warranty and Support	Release Notes	Discontinued Products

Installing the Hardware

1.When the Shutdown for Hardware Installation screen appears, click Shutdown to shut down Windows.

2.Turn OFF your computer, monitor, and other devices.

3.Unplug the power cords from the wall outlet or from the power strip, if you use one.

Figure 16 Unplug the Computer

4.Remove the cover from your computer.

CAUTION: Touch something metallic (an unpainted part of the

! computer’s case or a file cabinet) to discharge static electricity before touching anything inside your computer.

■ Static electricity can damage your computer’s internal parts.

5.Locate a free, half-height drive bay in the computer and remove its cover plate. Half-height drive bays are about 6” wide and 1.75” tall (15 cm x 4.5 cm).

6.If you will be replacing an existing CD-ROM drive, remove that drive.

Lay aside any cables that you unplug from the CD-ROM; you will later plug them into the hp dvd-writer drive.

Figure 17 A Free Drive Bay

7.Keep any mounting hardware, as it may be needed later for securing the drive in the drive bay.

hp dvd-writer dvd100i Technical Support Solutions Guide 10/25/01 Installing the hp dvd-writer dvd100i Drive ⇐ ⇒ 37