Speaker assembly
Description | Spare part number |
|
|
Speaker assembly (includes cable) | |
|
|
Before removing the speaker assembly, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 50), and then remove the following components:
a.Service cover (see Service cover on page 48)
b.Battery (see Battery on page 50)
c.Hard drive (see Hard drive on page 51)
d.WWAN module (see WWAN module on page 58)
e.WLAN module (see WLAN module on page 60)
f.Fan (see Fan on page 77)
g.Keyboard (see Keyboard on page 62)
h.Base enclosure (see Base enclosure on page 71)
i.System board (see System board on page 90)
Remove the speaker assembly:
1.Position the top cover upside down.
2.Remove the two Phillips PM2.0×3.0 screws (1) that secure the speaker assembly to the base enclosure.
Component replacement procedures | 95 |