VGA/USB board
Description | Spare part number |
|
|
VGA/USB board for use in HP EliteBook 840/HP ZBook 14 models | |
|
|
VGA/USB board for use in HP EliteBook 850 models | |
|
|
Before removing the VGA/USB board, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the following components:
a.Service cover (see Service cover on page 48)
b.Battery (see Battery on page 50)
c.Fan (see Fan on page 77)
d.Keyboard (see Keyboard on page 62)
e.Base enclosure (see Base enclosure on page 71)
Remove the VGA/USB board:
1.Disconnect the cable from the VGA/USB board (1).
2.Remove the two Phillips PM2.0×5.0 screws (2) that secure the VGA/USB board to the top cover.
80 | Chapter 6 Removal and replacement procedures for Authorized Service Provider parts |