
7.Remove the bezel from the display assembly (4).
The display bezel is available using spare part number
NOTE: In these steps, the display assembly will not be connected to the computer as shown in the illustration.
8.If you need to remove the raw display panel, remove the four Phillips PM2.0×3.0 screws (1) that secure the display panel to the display enclosure.
9.Lift and rotate the panel onto the computer (2).
The raw display panel is available using the following spare part numbers:
●
●
●
●
●
NOTE: In these steps, the display assembly will not be connected to the computer as shown in the illustration.
Component replacement procedures | 99 |