Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or screws.

Description

Spare part number

 

 

1-TB, 5400-rpm, 2.5-inch

676521-001

 

 

500-GB, 7200-rpm, 7-mm, SED

703268-001

 

 

500-GB, 7200-rpm, 2.5-inch, SED

683801-001

 

 

500-GB, 7200-rpm, 7-mm

703267-001

 

 

500-GB, 5400-rpm, 7-mm

683802-001

 

 

500-GB, 5400-rpm, 7-mm, FIPS

730946-001

 

 

320-GB, 5400-rpm, 7-mm

634862-001

 

 

320-GB, 5400-rpm, 7-mm

645193-001

 

 

Hard Drive Hardware Kit (includes hard drive bracket and screws)

730793-001

 

 

Before removing the hard drive, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the service cover (see Service cover on page 48).

5.Disconnect the battery.

Remove the hard drive:

1.Turn the computer upside down on a flat surface.

Component replacement procedures

51