HP Client Bridge M111 manual Managing certificates, Notification receivers

Working with the M111

Managing certificates

Access level

Type of access assigned to the user:

Read-only:The user has read and notify access to all MIB objects.

Read-write:The user has read, write, and notify access to all MIB objects.

Notification receivers

This table lists all defined SNMP notification receivers. SNMP notifications are sent to all receivers in this list. To add a new receiver, select Add New Receiver. Up to five receivers are supported. To edit a receiver, select its link in the Host column.

Host

The domain name or IP address of the SNMP notifications receiver to which the M111 will send notifications.

UDP port

The port on which the M111 will send notifications.

Version

The SNMP version (v1,v2c, v3) for which this receiver is configured.

Community/Username

For SNMP v1 and v2c, the SNMP Community name of the receiver.

For SNMP v3, the SNMP v3 Username of the receiver.

Security

Use these settings to control access to the SNMP agent.

Allowed addresses: List of IP address from which access to the SNMP agent is permitted. To add an entry, specify the IP address and appropriate Mask, and then select Add.

When the list is empty, access is permitted from any IP address.

Active interfaces: Select the checkboxes that correspond to the interfaces from which to allow access to the SNMP agent.

Managing certificates

Digital certificates are electronic documents that are used to validate the end parties or peers involved in data transfer. Various features on the M111 make use of certificates for authentication and/or encryption of data exchanged with peers.

3-37