HP Client Bridge M111 manual About this guide, Products covered, Important terms, Conventions

Introduction

About this guide

About this guide

This guide explains how to install, configure, and operate the M111 Client Bridge.

Products covered

The manual applies to the M111 Client Bridge (J9389A WW, J9523A Japan).

Important terms

The following terms are used in this guide.

Term	Description
MSM AP	Refers to any HP ProCurve Networking MSM3xx or MSM4xx Access
	Point.
Controller	Refers to any HP ProCurve Networking MSM7xx Controller, including
	both Access Controller and Mobility Controller variants.

Conventions

This guide uses specific syntax when directing you to interact with the management tool user interface. Refer to the following image for identification of key user-interface elements and then the table below for example directions:

Example directions in this guide	What to do in the user interface
Select Network > Ports	On the main menu select Network and then
	select Ports on the sub-menu.
For Password specify secret22.	In the Password field enter the text secret22
	exactly as shown.

Warnings and cautions

Do not proceed beyond a WARNING or CAUTION notice until you fully understand the hazardous conditions and have taken appropriate steps.

Warning Identifies a hazard that can cause physical injury or death.

1-2