Regulatory information

Notice for Canada

This device complies with the limits for a Class B digital device and conforms to Industry Canada standard ICES-003. Products that contain a radio transmitter comply with Industry Canada standard RSS210 and are labeled with an IC approval number.

Cet appareil numérique de la classe B est conforme à la norme ICES-003 de Industry Canada. La radio sans fil de ce dispsitif est conforme à la certification RSS 210 de Industry Canada et est étiquetée avec un numéro d'approbation IC.

This device complies with the Class B limits of Industry Canada. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept interference received, including interference that may cause undesired operation.

This device has been designed to operate with the antennas listed in this section, having a maximum gain of 5.6 dBi. Antennas not included in this list or having a gain greater that 5.6 dBi are strictly prohibited for use with this device. The required impedance is 50 ohms.

To reduce potential radio interference with other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.

This device is restricted to indoor use when using the 5.15-5.25 GHz band (Channels 36, 40, 44 and 48).

Notice for the European Community

This device complies with the EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and R&TTE Directive 1999/5/EC. Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed on the EU Declaration of Conformity that has been issued by HP for this device.

 

Countries of Operation & Conditions of Use

 

This device may be used in the following EU and EFTA countries: Austria, Belgium, Bulgaria,

 

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

 

Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,

 

Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the

 

United Kingdom. Requirements for indoor vs. outdoor operation, licensing and allowed

 

channels of operation apply in some countries as described below.

 

 

Note

The user must use the configuration utility provided with this device to ensure the channels

 

of operation are in conformance with the spectrum usage rules for EU and EFTA countries as

 

described below.

 

 

A-3

Page 81
Image 81
HP Client Bridge M111 manual Countries of Operation & Conditions of Use